Rutland Driveways & Landscaping 07312 132517 Site visit
Wide golden resin driveway with block edging curving round a lawn at a stone house
Empingham · LE15

Resin driveways in Empingham

Vuba resin bound driveways for Empingham's stone cottages, period streets and newer estates, built on a proper base and priced in writing.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A resin bound driveway in Empingham typically costs £150–£220 per m² all in. Most Empingham drives we price are around 40–75m², which works out at roughly £6,000–£16,500. A resin bound drive on a permeable base needs no planning permission. A new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit.

Typical cost here
£6,000–£16,500 for 40–75m²
Planning
Not needed for a permeable drive
Dropped kerb
Rutland County Council: £194 for the vehicle access permit
Ground
Limestone; wetter near the North Brook

Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.

Resin driveways in Empingham

What resin driveways in Empingham usually involve

A resin bound driveway is kiln-dried natural stone mixed with clear UV-stable resin and trowelled onto a properly built base. It is smooth, permeable and weed-free, and it suits stone houses better than almost any other surface.

Empingham sits at the eastern end of Rutland Water, below the dam, with a stone-built centre around the church and the main street, and later houses on its edges. Plots are often generous, and garden projects here frequently have the water or open country as a backdrop.

We cover Empingham (LE15) and the villages around it, including Exton, Whitwell, Normanton, Edith Weston and Tickencote.

Empingham specifically

Ground, drainage and conservation in Empingham

Empingham is on the limestone side of Rutland, and much of the village drains reasonably well, but the North Brook runs through it on its way to the Gwash, and ground near the brook stays wet.

Empingham has a conservation area and no Article 4 direction. Front-garden work outside listed buildings follows normal permitted development, with natural materials the safe choice in the conservation area.

The North Brook, a tributary of the Gwash, runs through Empingham, and Rutland's flood strategy traces it through Cottesmore, Empingham and Ryhall. You can check any address on the Environment Agency flood map.

Sources: Rutland conservation areas · Rutland flood risk strategy.

Rutland County Council

Permissions and fees in Empingham

  1. Check the surface ruleA permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does. Planning Portal guidance
  2. Conservation areaIf you are in the Empingham conservation area, use the surfaces and boundary treatments it suits. Rutland County Council: conservation areas
  3. Dropped kerbA new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit. The full Empingham dropped kerb process
  4. Design and priceWe design the drive to meet all of this, give you one fixed written price and build it.

Council fees and rules checked October 2026. Planning fees are the national fees from 1 April 2026.

Why us

What you get

  • Vuba UV-stable resin systems, installed to manufacturer specification by a Vuba approved installer
  • Permeable build-up, so rain soaks through instead of running to the road
  • No loose stone, no weeds through joints, nothing to rattle a pushchair
  • Blends chosen from sample trays laid against your own stone in daylight

The specification

  • Old surface broken out and taken away; ground checked at formation level
  • 150mm compacted MOT Type 1 sub-base as standard
  • Porous base course to suit the ground and the load
  • 18mm Vuba resin bound wearing course
  • Edging in granite setts, block or stone, agreed at the survey
  • Five year workmanship guarantee in writing
Resin bound surface finished against a granite sett edge
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Resin driveways in Empingham: questions

How much does a resin driveway cost in Empingham?
A resin bound driveway in Empingham typically costs £150–£220 per m² all in. Most Empingham drives we price are around 40–75m², which works out at roughly £6,000–£16,500. See our price guides. Your fixed price comes in writing after the site visit.
Do I need planning permission for a resin driveway in Empingham?
A permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does.
How do I get a dropped kerb in Empingham?
You apply to Rutland County Council: £194 for a Section 184 vehicle access permit (one or two homes). It is built by an approved contractor with street works accreditation and the right insurance, working under the council's permit. See dropped kerbs in Empingham for the full process.
Will a new driveway drain properly in Empingham?
Empingham is on the limestone side of Rutland, and much of the village drains reasonably well, but the North Brook runs through it on its way to the Gwash, and ground near the brook stays wet.

Request a site visit in Empingham

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit