Rutland Driveways & Landscaping 07312 132517 Site visit
Black tarmac driveway with a brindle block border in front of a stone house
Ryhall · PE9

Tarmac driveways in Ryhall

Tarmac driveways and long rural entrances in and around Ryhall, with sett and block borders.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A tarmac driveway in Ryhall typically costs £90–£130 per m² all in. Most Ryhall drives we price are around 35–65m², which works out at roughly £3,250–£8,500. A permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does. A new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit.

Typical cost here
£3,250–£8,500 for 35–65m²
Planning
Not needed if it drains to your own ground
Dropped kerb
Rutland County Council: £194 for the vehicle access permit
Ground
Limestone; river ground near the Gwash

Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.

Tarmac driveways in Ryhall

What tarmac driveways in Ryhall usually involve

A tarmac (asphalt) driveway is machine or hand laid hot over a compacted sub-base, usually as a binder course with a finer surface course on top. It is the hardest-wearing option for long drives, farm entrances and heavy vehicles.

Ryhall, with Belmesthorpe, sits on the River Gwash just north of Stamford, with stone cottages around the green and the church, and later estate housing. Being so close to Stamford, many homes here were built by the same post-war and modern housebuilders.

We cover Ryhall (PE9) and the villages around it, including Belmesthorpe, Essendine, Great Casterton, Little Casterton and Uffington.

Ryhall specifically

Ground, drainage and conservation in Ryhall

Ryhall is on the limestone, which generally drains well, but the Gwash runs through the village and ground near the river is wetter. We check each site before choosing between a soakaway and channel drainage.

Ryhall has a conservation area covering the historic village and no Article 4 direction, so normal permitted development rules apply outside listed buildings.

The River Gwash runs through Ryhall, and Rutland's flood strategy names Ryhall among the places with a few properties at river flood risk. You can check any address on the Environment Agency flood map.

Sources: Rutland conservation areas · Rutland flood risk strategy.

Rutland County Council

Permissions and fees in Ryhall

  1. Check the surface ruleA permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does. Planning Portal guidance
  2. Conservation areaIf you are in the Ryhall conservation area, use the surfaces and boundary treatments it suits. Rutland County Council: conservation areas
  3. Dropped kerbA new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit. The full Ryhall dropped kerb process
  4. Design and priceWe design the drive to meet all of this, give you one fixed written price and build it.

Council fees and rules checked October 2026. Planning fees are the national fees from 1 April 2026.

Why us

What you get

  • Stone mastic asphalt surface course as our standard build
  • Proper sub-base under it, so it does not rut or crack
  • Granite sett or block borders that lift the whole frontage
  • Long drives and farm entrances machine laid

The specification

  • Old surface out and the ground checked
  • 150mm compacted MOT Type 1 sub-base
  • Binder course laid hot and rolled
  • SMA (stone mastic asphalt) surface course
  • Sett, block or kerb edging restrained in concrete
  • Five year workmanship guarantee in writing
Long tarmac farm drive with sett edging between stone gate piers and post-and-rail fencing
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Tarmac driveways in Ryhall: questions

How much does a tarmac driveway cost in Ryhall?
A tarmac driveway in Ryhall typically costs £90–£130 per m² all in. Most Ryhall drives we price are around 35–65m², which works out at roughly £3,250–£8,500. See our price guides. Your fixed price comes in writing after the site visit.
Do I need planning permission for a tarmac driveway in Ryhall?
A permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does.
How do I get a dropped kerb in Ryhall?
You apply to Rutland County Council: £194 for a Section 184 vehicle access permit (one or two homes). It is built by an approved contractor with street works accreditation and the right insurance, working under the council's permit. See dropped kerbs in Ryhall for the full process.
Will a new driveway drain properly in Ryhall?
Ryhall is on the limestone, which generally drains well, but the Gwash runs through the village and ground near the river is wetter. We check each site before choosing between a soakaway and channel drainage.

Request a site visit in Ryhall

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit