Rutland Driveways & Landscaping 07312 132517 Site visit
Buff block paving driveway with a charcoal border at a stone house
Cottesmore · LE15

Block paving driveways in Cottesmore

Block paved driveways in Cottesmore, laid on a full sub-base with restrained edges and drainage to your own ground.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A block paved driveway in Cottesmore typically costs £120–£170 per m² all in. Most Cottesmore drives we price are around 35–65m², which works out at roughly £4,250–£11,000. A permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does. A new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit.

Typical cost here
£4,250–£11,000 for 35–65m²
Planning
Not needed if it drains to your own ground
Dropped kerb
Rutland County Council: £194 for the vehicle access permit
Ground
Mixed limestone and clay

Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.

Block paving driveways in Cottesmore

What block paving driveways in Cottesmore usually involve

A block paved driveway is concrete or clay blocks laid on a screeded sand course over a compacted sub-base, with edges restrained and joints sanded. Laid properly it carries cars for decades, and individual blocks can be lifted for repairs.

Cottesmore is a large village north east of Oakham, with ironstone and limestone cottages in the old centre and a good deal of later housing, and Kendrew Barracks, the former RAF Cottesmore, just outside it. Family homes here often want a wider drive and a lower-maintenance garden.

We cover Cottesmore (LE15) and the villages around it, including Market Overton, Barrow, Burley, Greetham and Thistleton.

Cottesmore specifically

Ground, drainage and conservation in Cottesmore

Cottesmore sits on mixed ground on the edge of the limestone, and the North Brook rises nearby. Drainage varies from plot to plot, so we dig a test hole before deciding between a soakaway and a permeable build-up.

Cottesmore has a conservation area covering the historic village and no Article 4 direction, so normal permitted development rules apply outside listed buildings.

The North Brook runs from Cottesmore towards Empingham and Ryhall, and Rutland's flood strategy traces its course through the village. You can check any address on the Environment Agency flood map.

Sources: Rutland conservation areas · Rutland flood risk strategy.

Rutland County Council

Permissions and fees in Cottesmore

  1. Check the surface ruleA permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does. Planning Portal guidance
  2. Conservation areaIf you are in the Cottesmore conservation area, use the surfaces and boundary treatments it suits. Rutland County Council: conservation areas
  3. Dropped kerbA new or wider entrance needs a dropped kerb from Rutland County Council: £194 for the vehicle access permit, and we can build the crossing under the council's permit. The full Cottesmore dropped kerb process
  4. Design and priceWe design the drive to meet all of this, give you one fixed written price and build it.

Council fees and rules checked October 2026. Planning fees are the national fees from 1 April 2026.

Why us

What you get

  • Full-depth sub-base and a screeded laying course, not blocks on soil
  • Restrained edges and a soldier course so the paving cannot creep
  • Drainage designed in: falls, channels or soakaways to your own ground
  • Permeable block available where the drainage needs it

The specification

  • Old surface out, ground checked, geotextile where the ground needs it
  • 150mm compacted MOT Type 1 sub-base
  • Screeded sharp sand laying course
  • Blocks laid to falls with a bedded soldier course edge
  • Kiln-dried sand jointing, compacted in
  • Five year workmanship guarantee in writing
Buff block paving finished with a charcoal soldier course border
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Block paving driveways in Cottesmore: questions

How much does a block paving driveway cost in Cottesmore?
A block paved driveway in Cottesmore typically costs £120–£170 per m² all in. Most Cottesmore drives we price are around 35–65m², which works out at roughly £4,250–£11,000. See our price guides. Your fixed price comes in writing after the site visit.
Do I need planning permission for a block paving driveway in Cottesmore?
A permeable drive, or one that drains to your own lawn or border, needs no planning permission; more than 5m² of impermeable surface draining to the road does.
How do I get a dropped kerb in Cottesmore?
You apply to Rutland County Council: £194 for a Section 184 vehicle access permit (one or two homes). It is built by an approved contractor with street works accreditation and the right insurance, working under the council's permit. See dropped kerbs in Cottesmore for the full process.
Will a new driveway drain properly in Cottesmore?
Cottesmore sits on mixed ground on the edge of the limestone, and the North Brook rises nearby. Drainage varies from plot to plot, so we dig a test hole before deciding between a soakaway and a permeable build-up.

Request a site visit in Cottesmore

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit