What a block paving driveway costs
Our 2026 guide prices, what changes the figure, and what to check before you sign.
A block paved driveway in Rutland and Stamford typically costs £120–£170 per m² all in. A two-car drive of 40–50m² is usually £5,500–£8,500.
- Per m²
- £120–£170
- Includes
- Dig-out, base, edging, surface, clear-up
- Not included
- Council fees
- Guarantee
- 5 years, in writing
Updated October 2026. Guide prices, not a quote. Your fixed price comes in writing after the site visit.
Block paved driveway prices in 2026
| Size | Typical cost |
|---|---|
| 30m² | £3,600–£5,100 |
| 40m² | £4,800–£6,800 |
| 50m² | £6,000–£8,500 |
| 60m² | £7,200–£10,200 |
| 80m² | £9,600–£13,600 |
Things that change the figure
- Block choice: standard, tumbled or premium
- Permeable blocks add £20–£40 per m²
- Pattern: herringbone has more cutting than stretcher bond
- Drainage: channels, soakaways
- Sub-base depth on clay ground
Check for these in any quote
- Sub-base depth and type written down
- How edges are restrained
- Where the water goes
- The guarantee, in writing
Planning and dropped kerbs by council
A front driveway needs no planning permission if it is permeable or drains to your own lawn or border; more than 5m² of impermeable surface draining to the road does (Planning Portal guidance). In the Stamford conservation area the Article 4 direction brings any new road-facing hard surface under planning control. A new or wider entrance also needs a dropped kerb, and the rules depend on the highway authority.
| Highway authority | Towns | Dropped kerb fee | Who builds it |
|---|---|---|---|
| Rutland County Council | Oakham, Uppingham, Ketton, Empingham, Cottesmore, Greetham, Langham, Whissendine, Ryhall, Edith Weston | £194 for the vehicle access permit | an accredited contractor under the council's permit (we can do it) |
| Lincolnshire County Council | Stamford | £300 for the council to build it, or £470 for a contractor | the county council, or an accredited contractor (we can do it) |
| Leicestershire County Council | Market Harborough, Great Bowden | £300 to apply (plus £240 if a contractor builds it) | the county council, or an accredited contractor (we can do it) |
| North Northamptonshire Council | Corby, Kettering, Weldon | £333 for the licence and inspection | an approved contractor (we can do it) |
Fees from each council's website, checked October 2026. See dropped kerbs for the process in each town.
Things people ask us
How much does a block paved driveway cost?
What is included in the price?
Why are some quotes much cheaper?
Request a site visit
We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.