Rutland Driveways & Landscaping 07312 132517 Site visit
Dark grey slatted sliding driveway gate between brick piers at a detached house
Corby · NN17 and NN18

Driveway gates in Corby

Sliding and swing driveway gates in Corby, automated and safety-tested, on foundations built for them.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A new automated sliding gate typically costs £5,000–£10,000 supplied and fitted, and automated swing gates £4,000–£8,000. Automating gates you already have is usually £1,500–£3,000. The power supply is priced on top. Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Ironstone, with clay and restored ground
Guarantee
5 years, in writing

Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.

Driveway gates in Corby

Driveway gates in Corby: what is involved

We fit sliding and swing driveway gates in aluminium and composite, on posts and foundations built for the weight, with automation, keypads and safety devices installed and tested to the standard.

Corby grew as a steel town: a New Town designated in 1950, with estates such as Kingswood, Lodge Park, Beanfield and Danesholme built for steelworkers, around the older villages of Corby Village, Great Oakley and Weldon. Priors Hall Park in the north east is planned for more than 5,000 homes, and many of its gardens are handed over as bare, compacted plots.

We cover Corby (NN17 and NN18) and the villages around it, including Weldon, Great Oakley, Corby Village, Gretton, Cottingham, Middleton, Rockingham, Stanion and East Carlton.

Corby specifically

Ground and conservation in Corby

Corby sits on the Northampton Sand ironstone that fed the steelworks, and large areas around the town were opencast quarried and restored. Ground can change from natural ironstone to clay or fill within a garden, so we dig before we design the base and drainage. Ground in Corby can change within a single garden, so we dig the first post hole as a trial and set the depth of every footing from what we find.

Corby has nine conservation areas, including the Old Village, Cottingham and Middleton, Gretton, Rockingham, Stanion, Great Oakley and Weldon. Its only Article 4 direction (Kingswood) controls houses in multiple occupation and does not affect driveways, porches or extensions.

Sources: North Northamptonshire conservation areas · Priors Hall Park.

North Northamptonshire Council

Permissions in Corby

  1. PlanningGates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and the Corby conservation area have tighter rules, so we check your address before anything is designed. Planning Portal: fences, gates and walls
  2. TreesTrees in a conservation area need six weeks' notice before work, and protected trees need consent; both are free. North Northamptonshire: tree protection
  3. Design and priceWe measure up, check the ground and the planning position, and give you one fixed written price.

Rules checked October 2026.

Why us

What you get

  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs
  • Safety edges and photocells, force-tested to the standard

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year workmanship guarantee in writing
Dark grey slatted sliding driveway gate between brick piers at a detached house
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Driveway gates in Corby: questions

How much does a driveway gate cost in Corby?
A new automated sliding gate typically costs £5,000–£10,000 supplied and fitted, and automated swing gates £4,000–£8,000. Automating gates you already have is usually £1,500–£3,000. The power supply is priced on top. Your fixed price comes in writing after the site visit.
Do I need planning permission for a driveway gate in Corby?
Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and the Corby conservation area have tighter rules, so we check your address before anything is designed.
Does the ground in Corby make a difference?
Ground in Corby can change within a single garden, so we dig the first post hole as a trial and set the depth of every footing from what we find.
Sliding or swing gates?
Sliding gates suit drives that slope up from the road or are short, because they do not need space to swing. Swing gates are simpler where there is room for them to open inwards.
Are electric gates safe?
They are when they are fitted with safety edges or photocells and force-tested after installation, which we do on every automated gate.

Request a site visit in Corby

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit