Rutland Driveways & Landscaping 07312 132517 Site visit
Dark grey slatted sliding driveway gate between brick piers at a detached house
Uppingham · LE15

Driveway gates in Uppingham

Sliding and swing driveway gates in Uppingham, automated and safety-tested, on foundations built for them.

5 yearWritten guarantee
VubaApproved resin installer
NVQQualified
8 yearsTrading in Rutland

A new automated sliding gate typically costs £5,000–£10,000 supplied and fitted, and automated swing gates £4,000–£8,000. Automating gates you already have is usually £1,500–£3,000. The power supply is priced on top. Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles.

Automated sliding gate
£5,000–£10,000
Planning
Not needed up to 2m (1m by a road)
Ground
Northampton Sand ironstone; variable, sloping
Guarantee
5 years, in writing

Our 2026 guide prices, all in. Your fixed price comes in writing after the site visit. Council fees checked October 2026.

Driveway gates in Uppingham

Driveway gates in Uppingham: what is involved

We fit sliding and swing driveway gates in aluminium and composite, on posts and foundations built for the weight, with automation, keypads and safety devices installed and tested to the standard.

Uppingham is a hilltop market town of ironstone and limestone, with the school buildings, the High Street and the Market Place at its heart, Victorian and interwar houses on the roads out, and later estates to the north and east. Many centre properties have tight frontages or rear courtyards rather than front gardens.

We cover Uppingham (LE15) and the villages around it, including Lyddington, Seaton, Bisbrooke, Glaston, Wing, Preston, Ayston, Ridlington, Belton-in-Rutland, Caldecott and Morcott.

Uppingham specifically

Ground and conservation in Uppingham

Uppingham stands on the Northampton Sand ironstone that runs down the west side of Rutland. It usually drains better than the Vale clay around Oakham, but it varies within a street and the town's slopes push water downhill, so falls and edge drainage need the same care. Ground in Uppingham can change within a single garden, so we dig the first post hole as a trial and set the depth of every footing from what we find.

The Uppingham conservation area covers the historic centre; the town itself has no Article 4 direction. Several nearby villages do, including Lyddington, Seaton, Ayston, Preston, Ridlington and Belton-in-Rutland, where front walls, gates and parking spaces can need planning permission.

Sources: Rutland conservation areas and Article 4 list · Historic England: building stones of Rutland.

Rutland County Council

Permissions in Uppingham

  1. PlanningGates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and the Uppingham conservation area have tighter rules, so we check your address before anything is designed. Planning Portal: fences, gates and walls
  2. TreesTrees in a conservation area need six weeks' notice before work, and protected trees need consent; both are free. Rutland County Council: tree works
  3. Design and priceWe measure up, check the ground and the planning position, and give you one fixed written price.

Rules checked October 2026.

Why us

What you get

  • Sliding and swing gates in aluminium and composite, matched to your fencing
  • Foundations and posts built for the gate's weight and the motor
  • Automation, keypads, intercoms and remote fobs
  • Safety edges and photocells, force-tested to the standard

The specification

  • Survey of the opening, the slope and the power route
  • Foundation beam or post footings in concrete
  • Gate hung or track set, level and true
  • Motor, controls and safety devices fitted
  • Power by a registered electrician, then force-tested
  • Five year workmanship guarantee in writing
Dark grey slatted sliding driveway gate between brick piers at a detached house
★★★★★

“Really pleased with my new driveway. Beautifully finished, friendly professional workmen, would definitely recommend and will be using them again for the garden once other renovations complete.”

Driveway — Google review

“Absolutely great guys, job was done in good time and looks brilliant. No complaints, the driveway is immaculate. More work in the near future, thanks again!”

Driveway — Google review
Questions

Driveway gates in Uppingham: questions

How much does a driveway gate cost in Uppingham?
A new automated sliding gate typically costs £5,000–£10,000 supplied and fitted, and automated swing gates £4,000–£8,000. Automating gates you already have is usually £1,500–£3,000. The power supply is priced on top. Your fixed price comes in writing after the site visit.
Do I need planning permission for a driveway gate in Uppingham?
Gates are normally permitted development up to 2m high, or 1m next to a road used by vehicles. They must not open outwards over the footway or road. In a conservation area or on a listed house, gates facing the road can need permission. Listed buildings and the Uppingham conservation area have tighter rules, so we check your address before anything is designed.
Does the ground in Uppingham make a difference?
Ground in Uppingham can change within a single garden, so we dig the first post hole as a trial and set the depth of every footing from what we find.
Sliding or swing gates?
Sliding gates suit drives that slope up from the road or are short, because they do not need space to swing. Swing gates are simpler where there is room for them to open inwards.
Are electric gates safe?
They are when they are fitted with safety edges or photocells and force-tested after installation, which we do on every automated gate.

Request a site visit in Uppingham

We measure up, check levels and drainage, and send a written proposal with the build-up, the programme and one whole price. No pressure and no follow-up sales calls.

☎Call 07312 132517 Site visit